1-channel low-noise microphone preamplifier, for mains operation or battery operation.
- 1 microphone input, XLR, bal.
- Gain, 11 steps 20-70dB
- LED green/red for operation/peak
- Phantom power +24V, can be switched on additionally
- Microphone phase can be switched
- Lo cut 100Hz, hi cut 12kHz, 12dB/oct., switchable
- 1 preamplifier output
- 1 stereo line input
- 1 stereo line output
- Level control and panorama control for mixing the microphone signal to the stereo line channel
| Frequency range | 20-20,000Hz |
| Input sensitivity | 0.3-150mV, switchable |
| Input impedance | |
| Mic | 2.2k ohm |
| Stereo line | 10k ohm |
| Outputs | |
| Line, bal. | 1V/100 ohm, 12V max. |
| Stereo line | 1V/100 ohm, 6Vmax. |
| Stereo master | - |
| Filter, low cut | 100Hz/-3dB, 12dB/oct. |
| Filter, high cut | 12kHz/-3dB, 12dB/oct. |
| Gain, mic | 20-70dB |
| Gain, stereo line | 0dB |
| S/N ratio, mic | > 66dB (unweighted) |
| S/N ratio, line | 80dB (unweighted) |
| THD | <0.01% |
| Power supply | 15V˜ via supplied plug-in PSU 10VA; alternatively 4 x 9V battery |
| Dimensions | 116x55x125mm |